Camera interfaces
PIKE Technical Manual
V5.0.0
107
Blink codes are used to signal warnings or error states:
The following sketch illustrates the series of blinks for a Format_7_error_1:
You should wait for at least 2 full cycles because the display of blinking codes
starts asynchronously - e.g. on the second blink from S2.
Class S1
Error code S2
Warning
1 blink
DCAM
2 blinks
MISC
3 blinks
FPGA
4 blinks
Stack
5 blinks
FPGA boot error
1-5 blinks
Stack setup
1 blink
Stack start
2 blinks
No FLASH object
1 blink
No DCAM object
1 blink
Register mapping
3 blinks
VMode_ERROR_STATUS
1 blink
FORMAT_7_ERROR_1
2 blinks
FORMAT_7_ERROR_2
3 blinks
Table 24: Error codes
Figure 56: Warning and error states
