manualshive.com logo in svg

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 233 / 247

Share
Download
Allied Vision Technologies AVT Marlin Technical Manual Download Page 233

Configuration of the camera

 MARLIN Technical Manual

 

V2.4.0

233

Reset of error codes

The 

ErrorCode

 field is set to zero on the next write access.

You may also reset the 

ErrorCode

•

by writing 00000000h to the 

USER_PROFILE 

register.

Note

L

•

A profile save operation automatically disables captur-
ing of images.

•

A profile save or restore operation is an uninterruptable 
(atomic) operation – the write response (of the asyn-
chronous write cycle) will be sent after completion of 
the operation.

•

Restoring a profile will not overwrite other settings 
than listed above.

•

If a restore operation fails or the specified profile does 
not exist, all registers will be overwritten with the 
hard-coded factory defaults (profile #0).

•

Data written to this register is not reflected in the 
standard memory channel registers.

Summary of Contents for AVT Marlin
























































































































































































































































Reviews:

No comments