Allied Vision Technologies AVT Marlin Technical Manual Download Page 18

Page: 18 / 247

Declarations of conformity

MARLIN Technical Manual

V2.4.0

Declarations of conformity

Allied Vision Technologies declares under its sole responsibility that the fol-
lowing products

to which this declaration relates is in conformity with the following stan-
dard(s) or other normative document(s):

•

FCC Class B

•

CE (following the provisions of 2004/108/EG directive)

•

RoHS (2002/95/EC)

Category Name

Model Name

Digital Camera (IEEE 1394)

MARLIN F-033B

MARLIN F-033C

MARLIN F-046B

MARLIN F-046C

MARLIN F-080B

MARLIN F-080C

MARLIN F-145B2

MARLIN F-145C2

MARLIN F-146B

MARLIN F-146C

MARLIN F-201B

MARLIN F-201C

MARLIN F-131B

MARLIN F-131C

Table 3: Model names

Summary of Contents for AVT Marlin
























































































































































































































































Search results

Summary of Contents for AVT Marlin

Reviews:

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 18 / 247

Search results

Summary of Contents for AVT Marlin

Reviews: