Allied Vision Technologies AVT Marlin Technical Manual Download Page 215

Page: 215 / 247

Configuration of the camera

MARLIN Technical Manual

V2.4.0

215

Deferred image transport

Using the register, the sequence of recording and the transfer of the images
can be paused. Setting

HoldImg

prevents transfer of the image. The images

are stored in

ImageFIFO

The images indicated by NumOfImages are sent by setting the

SendImage

bit.

When

FastCapture

is set (in Format_7 only), images are recorded at the high-

est possible frame rate.

0xF1000258

SHDG_INFO

Presence_Inq

[0]

Indicates presence of this
feature (read only)

---

[1..7]

Reserved

MaxImageSize

[8..31]

Maximum shading image size
(in bytes)

Register

Name

Field

Bit

Description

0xF1000260

DEFERRED_TRANS

Presence_Inq

[0]

Indicates presence of this
feature (read only)

---

[1..4]

Reserved

SendImage

[5]

Send NumOfImages now
(auto reset)

HoldImg

[6]

Enable/Disable deferred
transport mode

FastCapture

[7]

Enable/disable fast capture
mode

---

[8..15]

Reserved

FiFoSize

[16..23] Size of FIFO in number of

images (read only)

NumOfImages

[24..31] Write: Number of images to

send

Read: Number of images in
buffer

Table 109: Advanced register:

Deferred image transport

Register

Name

Field

Bit

Description

Table 108: Advanced register:

Shading

Summary of Contents for AVT Marlin
























































































































































































































































Search results

Summary of Contents for AVT Marlin

Reviews:

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 215 / 247

Search results

Summary of Contents for AVT Marlin

Reviews: