Allied Vision Technologies AVT Marlin Technical Manual Download Page 220

Page: 220 / 247

Configuration of the camera

MARLIN Technical Manual

V2.4.0

220

Delayed Integration Enable (IntEna)

A delay time between initiating exposure on the sensor and the activation
edge of the

IntEna

signal can be set using this register. The

on/off

flag acti-

vates/deactivates integration delay. The time can be set in µs in

DelayTime

Note

•

Please note that only one edge is delayed.

•

IntEna_Out

is used to control an exposure, it is pos-

sible to have a variation in brightness or to precisely
time a flash.

Figure 85: Delayed integration timing

Register

Name

Field

Bit

Description

0xF1000340 IO_INTENA_DELAY

Presence_Inq

[0]

Indicates presence of this
feature (read only)

---

[1..5]

Reserved

ON_OFF

[6]

Enable/Disable integration
enable delay

---

[7..11]

Reserved

DELAY_TIME

[12..31]

Delay time in µs

Table 114: Advanced register:

Delayed Integration Enable (IntEna)

Summary of Contents for AVT Marlin
























































































































































































































































Search results

Summary of Contents for AVT Marlin

Reviews:

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 220 / 247

Search results

Summary of Contents for AVT Marlin

Reviews: