Allied Vision Technologies AVT Marlin Technical Manual Download Page 228

Page: 228 / 247

Configuration of the camera

MARLIN Technical Manual

V2.4.0

228

Advanced register: frame counter

The

frame counter

feature is controlled by the following advanced feature

Having this feature enabled, the current

frame counter

value (images read

out of the sensor, equivalent to # FrameValid) will be inserted as a 32-bit
integer value into any captured image.

Setting the

Reset

flag to 1 resets the frame counter to 0 — the

Reset

flag

is self-cleared.

The

ON_OFF

and

LinePos

fields are simply mirrors of the time stamp feature.

Settings of these fields are applied to all image stamp features.

Additionally there is a register for direct read out of the frame counter value.

Register

Name

Field

Bit

Description

0xF1000610 FRMCNT_STAMP

Presence_Inq

[0]

Indicates presence of this
feature (read only)

Reset

[1]

Reset frame counter

---

[2..5]

Reserved

ON_OFF

[6]

SIS (time stamp) on/off

---

[7]

Reserved

---

[8..15]

Reserved

LinePos

[16..31]

Line position of SIS (time
stamp)

0xF1000614 FRMCNT

[0..31]

Frame counter

Table 126: Advanced register:

Frame counter

Note

The 4 bytes of the

frame counter

value will be inserted as

the

5th to 8th byte of a line

Summary of Contents for AVT Marlin
























































































































































































































































Search results

Summary of Contents for AVT Marlin

Reviews:

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 228 / 247

Search results

Summary of Contents for AVT Marlin

Reviews: