Allied Vision Technologies AVT Marlin Technical Manual Download Page 224

Page: 224 / 247

Configuration of the camera

MARLIN Technical Manual

V2.4.0

224

Mirror image

The table below illustrates the advanced register for

Mirror image

Soft Reset

The SOFT_RESET feature is similar to the INITIALIZE register, with the follow-
ing differences:

•

1 or more bus resets will occur

•

the FPGA will be rebooted

The reset can be delayed by setting the

Delay

to a value unequal to 0 - the

delay is defined in 10 ms steps.

Note

Trigger delay works with external trigger modes only.

Register

Name

Field

Bit

Description

0xF1000410 MIRROR_IMAGE

Presence_Inq

[0]

Indicates presence of this
feature (read only)

---

[1..5]

Reserved

ON_OFF

[6]

Mirror image on/off

1: on
0: off

Default: off

---

[7..31]

Reserved

Table 121: Advanced register:

Mirror

Register

Name

Field

Bit

Description

0xF1000510 SOFT_RESET

Presence Inquiry

[0]

Read only

---

[1..5]

Reserved

Reset

[6]

Initiate reset

---

[7..19]

Reserved

Delay

[20..31]

Delay reset in 10 ms steps

Table 122: Advanced register:

Soft reset

Summary of Contents for AVT Marlin
























































































































































































































































Search results

Summary of Contents for AVT Marlin

Reviews:

Allied Vision Technologies AVT Marlin, Technical Manual, Page: 224 / 247

Search results

Summary of Contents for AVT Marlin

Reviews: