Allied Telesis IS230-10GP, Web User Manual

Page: 70 / 136

IS230-10GP Industrial layer 2 Switch Web User Guide
71
The STP Port Status settings in the ensuing table are informational only:
Port, Identifier (Priority / Port Id), Path Cost Conf/Oper, Designated Root
Bridge, Root Path Cost, Designated Bridge, Edge Port Conf/Oper, P2P
MAC Conf/Oper, Port Role and Port State.
STP Statistics
To access this page, click L2 Switching > Spanning Tree > STP
Statistics . This window is informational only.
The STP Statistics settings in the ensuing table are informational only:
Port, Configuration BPDUs Received, TCN BPDUs Received,
Configuration BPDUs Transmitted and TCN BPDUs Transmitted.
X-Ring Elite
The X-Ring Elite function provides an improvement over Spanning Tree
and Rapid Spanning Tree and a rapid auto recovery in the event that the
network suffers a corrupt or broken link and prevents network loops.
X-Ring Elite Settings
The X-Ring Elite Settings allows you to enable or disable the state of the
X-Ring settings.
To access this page, click
L2 Switching > X-Ring Elite > X-Ring Elite
Settings .
Figure 48. L2 Switching > X-Ring Elite > X-Ring Elite Settings
The following table describes the items in Figure 48.
The Information settings in the ensuing table are informational only: X-
Ring Elite State.
X-Ring Elite Groups
The X-Ring Elite Groups page allows you to select the function and role for
each device and the connected ports.
To access this page, click
L2 Switching > X-Ring Elite > X-Ring Elite
Table 45. X-Ring Elite Settings
Item Description
State Select Enabled or Disabled to setup the X-Ring Elite mode.
Apply Click Apply to save the values and update the screen.