manualshive.com logo in svg

Allied Telesis IS230-10GP, Web User Manual

Share
Download
Allied Telesis IS230-10GP Web User Manual Download Page 127

Chapter 2: Managing Switch

128

To access this page, click 

Diagnostics

 > 

System Log

 > 

Local Logging

.

Figure 114. Diagnostics > System Log > Local Logging

The following table describes the items in Figure 114.

The 

Local Logging Settings Status

 settings in the ensuing table are 

informational only: Status, Target, Severity and 

Delete

 (click to delete the 

desired target).

Table 110. Local Logging

Item

Description

Target

Enter the local logging target.

Severity

Click the drop-down menu to select the severity level for local log 
messages.
The level options are:
n

emerg: Indicates system is unusable. It is the highest level of 
severity

n

alert: Indicates action must be taken immediately

n

crit: Indicates critical conditions

n

error: Indicates error conditions

n

warning: Indicates warning conditions

n

notice: Indicates normal but significant conditions

n

info: Indicates informational messages

n

debug: Indicates debug-level messages

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands