Allied Telesis IS230-10GP Web User Manual Download | Manualshive

Page: 22 / 136

background image

IS230-10GP Industrial layer 2 Switch Web User Guide

23

There are several administrative interfaces to the switch:

1. The graphical web interface is accessible via the switch's built-in web

server. Both HTTP and secure HTTPS with SSL are supported over an
Ethernet connection.

Note

This is the recommended method for managing the switch.

2. Command Line Interface (CLI) can be used to read/write most settings.

This interface may be used with an Ethernet connection
(recommended) or the Console port.

3. The terminal interface via the RS232/USB port (Console port) or over

the network using telnet or Secure Shell (SSH). This interface uses the
CLI administrative interface only.

4. The SNMP interface can be used to read/write many settings and is

available within the Web and CLI administrative interfaces.

Default User

Name and

Password

When logging into any of the administrative interfaces for the first time, use
the default username and password. They are:

Username:

manager

Password:

friend

.

Note

Both the user name and password are case sensitive.

Allied Telesis recommends that you change to a new password when you
initially configure the switch.



If you are using the graphical web interface, go to “Change Default
Password” on page 28.



If you are using the CLI interface, refer to the commands in the
Security chapter of the IS230-10GP Reference Guide.

Using the

Graphical (Web)

Interface

The graphical interface is provided via a web server in the switch and can
be accessed via a web browser such as Opera, Mozilla, or Internet
Explorer.

Note

JavaScript must be supported and enabled in your browser for the
graphical interface to work correctly.

HTTP and HTTPS (secure HTTP) are supported for access to the web
server. By default, both protocols are enabled. Either or both may be
disabled to secure the switch. (See the Remote Access Security topic in
this section.)

«
...
20
21
22
23
24
...
»

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments

Related manuals for IS230-10GP

C50FSi - VB Network Camera

Brand: Canon Pages: 32

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Brand: Tyco Electronics Pages: 18

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: Javad Pages: 35

Azure StorSimple 8100

Brand: Microsoft Pages: 12

Brand: TP-Link Pages: 73

Brand: LogLogic Pages: 30

Brand: Mercusys Pages: 35

NOVA300 AML02304U1

Brand: Nexxt Pages: 75

ADSL2+ Wireless MIMO Router

Brand: Ace Pages: 64

Brand: IBM Pages: 72

Brand: MAKER MADE Pages: 40

Brand: TP-Link Pages: 2

Brand: HighPoint Pages: 3

FaxFinder FF-120

Brand: Multitech Pages: 20

Brand: Panduit Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands