IS230-10GP Industrial layer 2 Switch Web User Guide
49
allows for the logical merging of multiple ports into a single link.
To access this page, click
L2 Switching
>
Link Aggregation
>
LAG
Management
.
Figure 21. L2 Switching > Link Aggregation > LAG Management
The following table describes the items in Figure 21.
The
LAG Management Information
settings in the ensuing table are
informational only: LAG, Name, Type, Link State, Active Member, Standby
Member,
Edit
(click to modify the settings) and
Clear
(click to load default
settings).
LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG
status, speed and flow control functions.
In this example we will configure a LAG between the following switches:
To access this page, click
L2 Switching
>
Link Aggregation
>
LAG Port
Settings
.
Table 18. LAG Management
Item
Description
LAG
Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Name
Enter an entry to specify the LAG name.
Type
Click the radio button to specify the type mode: Static or LACP.
Ports
Click the drop-down menu to select designated ports: Port1-10.
Apply
Click
Apply
to save the values and update the screen.
Summary of Contents for IS230-10GP
