manualshive.com logo in svg

Allied Telesis IS230-10GP, Web User Manual, Page: 104 / 136

Share
Download
Allied Telesis IS230-10GP Web User Manual Download Page 104

IS230-10GP Industrial layer 2 Switch Web User Guide

105

The following table describes the items in Figure 88 on page 104.

The 

LLDP Port VLAN TLV Status

 settings in the ensuing table are 

informational only: Port and Selected VLAN.

LLDP Local Device Info

The LLDP Local Device Info page allows you to view information regarding 
network devices, providing that the switch has already obtained LLDP 
information on the devices.
To access this page, click 

Management

 > 

LLDP

 > 

LLDP Local Device 

Info

.

Figure 89. Management > LLDP > LLDP Local Device Info

The 

Local Device Summary

 settings in the ensuing table are 

informational only: Chassis ID Subtype, Chassis ID, System Name, 
System Description, Capabilities Supported, Capabilities Enabled and Port 
ID Subtype.
The 

Port Status

 settings in the ensuing table are informational only: Port, 

Selected VLAN and 

Detail

 (click the radio box and click 

Detail

 to display 

the port status details).

Table 85. VLAN Name TLV VLAN Selection

Item

Description

Port Select

Enter the port number to associated with the TLV selection.

VLAN Select

Select the VLAN Name ID to be carried out (multiple selection is 
allowed).

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments