manualshive.com logo in svg

Allied Telesis IS230-10GP, Web User Manual, Page: 103 / 136

Share
Download
Allied Telesis IS230-10GP Web User Manual Download Page 103

Chapter 2: Managing Switch

104

Figure 87. Management > LLDP > LLDP Port Settings > Optional TLVs 

Selection

The following table describes the items in Figure 87.

The 

LLDP Port Status

 settings in the ensuing table are informational 

only: Port, State and Selected Optional TLVs.

Figure 88. Management > LLDP > LLDP Port Settings > VLAN Name TLV 

VLAN Selection

Table 84. Optional TLVs Selection

Item

Description

Port Select

Enter the port number associated with the TLV (optional) 
selection.

Optional TLV 
Select

Click the drop-down menu to select the LLDP optional TLVs to 
be carried (multiple selections are allowed).
System Name: To include system name TLV in LLDP frames.
Port Description: To include port description TLV in LLDP 
frames.

System Description: To include system description TLV in 
LLDP frames.

System Capability: To include system capability TLV in LLDP 
frames.

802.3 MAC-PHY: 

802.3 Link Aggregation: 

802.3 Maximum Frame Size: 

Management Address: 

802.1 PVID: 

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments