Overview
2
The AT-3624TS uses two 50-pin Telco connectors. Using an AT-ADAPT-2
or an octopus cable to the AT-3624TS also enables the use of RJ45
connectors.
Features
Table 1 summarizes the features of the AT-3624TS and AT-3624TRS hubs.
Specifically, this table calls out the model number, port count, and media/
connector type for each Slave hub.
Table 1:
AT-3624TS and AT-3624TRS Features
The hubs are IEEE 802.3 compliant and Ethernet compatible. When used
in conjunction with an AT-3600 Master in a department concentrator
chassis, the AT-3624TS and AT-3624TRS support ATI’s Omega Agent,
Simple Network Management Protocol (SNMP), the second version of the
Management Information Base (MIB-II) and Hub MIB.
For the Slave hubs to be manageable, another hub must perform as a
Master in the chassis. Hubs in the AT-3600 Series that can function as a
Master are the AT-3606F, the AT-3606F/SMA, the AT-3606F/SM, the
AT-3606F/SC, the AT-3606F/ST, the AT-3608, the AT-3612T, the
AT-3612TR, the AT-3624T, and the AT-3624TR.
Figure 1:
AT-3624TS Front
and Back Panels
13
15
17
19
21
23
Front
Back
Telco
AUI
Interrepeater
Port
ports
activity
bus port
port
LEDs
Hub
LEDs
status
Model Number
Port Count
Media/Connector Type
Power Cord
AT-3624TS-15
24
50-Pin Telco Connectors
U.S.A. Power Cord
AT-3624TS-25
24
50-Pin Telco Connectors
Without Power Cord
AT-3624TRS-15
24
RJ45 Connectors
U.S.A. Power Cord
AT-3624TRS-25
24
RJ45 Connectors
Without Power Cord
