Allied Telesis AR100 series, User Manual

Page: 107 / 128

Using Telephony Services 7-107
■
If you dial a number which is unallocated or realise you have dialled a
wrong digit, wait until you hear the router’s unavailable tone in the
earpiece of the phone and then hookflash once to return to the original
caller. If you dial a wrong number, hookflash once to drop the call and
again to return to the original call.
Call Transfer
Call Transfer allows you to implicity transfer an active call to a third party. You
need Flexible Calling enabled on your ISDN line.
■
To transfer an active call to a third party, and announce the call, press and
release the flash hook button on your telephone to put the active call on
hold and receive a dial tone. Then dial the third party’s phone number.
Announce the call and press and release the flash hook button to establish
a conference call. Hang-up the phone. The ISDN network will do an
implicit transfer to directly connect the two callers.
■
To transfer an active call to a third party, without announcing the call
(known as a blind transfer), press and release the flash hook button on
your telephone to put the active call on hold and receive a dial tone. Then
dial the third party’s phone number. Before the third party answers the
call, hang-up the phone. The ISDN network will do an implicit transfer to
directly connect the two callers.
Call Forwarding
The AR140 supports Call Forwarding. To use this feature, use the telephone
keypad to enter the appropriate dial access codes. Your telephone company
will provide you with the access code. In most cases the call forwarding
activation code is “*72” and the deactivation code is “*73”. While the Call
Forwarding feature is active, the forwarded call is announced by a single ring
on the telephone from which you entered the access codes. This feature
reminds you that your calls are being forwarded.
■
To activate call forwarding, dial the activate access code (for instance “*72”)
and then the number you want incoming calls to be forwarded to.
■
To deactivate call forwarding, dial the deactivate access code (for instance
“*72”).