Allied Telesis AR100 series, User Manual

Page: 45 / 128

Configuring your router for the first time 5-45
2. Choose Internet and Inter-Office Connection using dial-on-demand
ISDN on the Welcome page. Click the Next button.
3. If you have an AR140 router with voice ports, the “Phone Setup page” on
page 45 opens.
If you have an AR130 router without voice ports and are in North America,
the “ISDN Setup page” on page 48 opens. Go to step 10. on page 48.
If you have an AR130 router without voice ports, and you are not located in
the USA or Canada, the “Internet Connection page for ISDN Dial-on-
Demand” on page 48 opens. Go to step 12. on page 49.
Figure 5-16: Phone Setup page
If callback is supported by your ISDN service and the remote office you are
connecting to, you can enable callback on the router. This means the remote
office router will call you back immediately when you call it, reversing ISDN
charges.
4. In the “Phone Setup page” on page 45, enter the local telephone numbers
allocated to you by your ISDN provider. These are the telephone numbers
that people will use to call you. If you only have one number, leave the other
blank.
5. Choose whether or not to enable callback on each phone port.
6. Select whether you want both phones to ring when either number is called,
or only the phone on the port with number called. Click the
OK button.
At this point the wizard performs some automatic checks. If these checks
succeed, the next page to open is the “ISDN Setup page” on page 48 if you are
in North America, or the “Internet Connection page for ISDN Dial-on-
Demand” on page 48 in the rest of the world.
If the connection is not yet working as the wizard expects, the following two
pages may appear.