Allied Telesis AR100 series, User Manual

Page: 46 / 128

5-46 AR100 Series Internet Router User Guide
Figure 5-17: ISDN Not Active page
North America only. If the ISDN Not Active page opens, it means that the
ISDN port is not connected to the ISDN service.
In the USA and Canada, the router needs to be configured with the ISDN
switch type that you are connected to, and the Service Provider IDs (SPIDs)
that identify your ISDN services. The router tries to find this information
automatically. If the ISDN port is not connected to the ISDN service, the wizard
cannot find this information.
7. Make sure that the ISDN port on the router is connected to the ISDN service
providers termination point (NT1 or line wall jack) using the green cable.
The wizard can try again to automatically find the ISDN switch type and SPID
information, or you can enter it manually.
8. Choose whether you want the wizard to automatically detect this
information, or whether you want to enter it yourself. Click the
OK button.
If you choose autodetect and it now succeeds, the next page to open is the
“Internet Connection page for ISDN Dial-on-Demand” on page 48. Go to
step 12. on page 49.
If you choose autodetect and it fails again, the next page to open is the
“Auto SPID Failure page” on page 47.
If you choose to enter the data yourself, the “ISDN Setup page” on page 48
opens. Go to step 10. on page 48.