Allied Telesis AR100 series User Manual Download

Page: 119 / 128

Troubleshooting

9-119

Figure 9-5: Dynamic IP Address Assignment Failed dialog

■

Make sure that the router is connected to the power supply and is
switched on.

■

Make sure the Ethernet port on the PC is connected to the router, and click

Continue

■

If the problem persists, contact your router supplier.

No routers found

When the AR100 Series Access Wizard is started it searches for any AR100
series routers connected to the PC (or LAN). If it does not find any, this dialog
appears.

Figure 9-6: No Routers Found dialog

■

Make sure the router is connected to the PC and to the power supply, as
shown in the Start Here Guide, and that the router is switched on. Click

Continue

to try again.

Summary of Contents for AR100 series

































































































































Search results

Summary of Contents for AR100 series

Reviews:

Related manuals for AR100 series

Brands by name

Popular brands

Allied Telesis AR100 series, User Manual

Search results

Summary of Contents for AR100 series

Reviews:

Related manuals for AR100 series

Brands by name

Popular brands