Chapter 2: LED Indicators and back panel
Page
7
USB:
To connect the CopperJet to the USB port of the PC. Note: not
available on all units.
Ethernet: To connect the CopperJet to the Ethernet port of the PC, hub or
switch.
2.5 Softkey
The purpose of the Softkey is to return the CopperJet to its factory default
settings. When pressing and holding the button, the lights will start to blink
indicating that the default configuration is about to be restored. When keeping
the button pressed, the lights will stop blinking and stay on indicating that the
default configuration is restored. The softkey can be released and the CopperJet
will restart automatically with the default configuration.
Important: Never disconnect the power from the modem while the
softkey is pressed.
