Chapter 4: Before you start
Page
9
4 Before
you
start
The following information may be required for configuring the CopperJet. If you
do not know if all the information is needed, please contact your DSL service
provider before proceeding with the configuration.
4.1 IP Address Settings
The CopperJet software installation process allows the server to dynamically
assign IP Address settings. If your application requires static setting of specific
address information, you need to receive the following information:
•
IP Address
•
Subnet Mask (for Bridged Ethernet applications only)
•
Default Gateway (for Bridged Ethernet applications only)
4.2 Name Server Information
The CopperJet software installation process allows the server to dynamically
assign Name Server Address settings. If your application requires static setting of
specific address information, you need to receive the following information:
•
Primary DNS Address
•
Secondary DNS Address
•
Primary WINS Address
•
Secondary WINS Address
4.3 ATM
Settings
The following ATM settings should be available during configuration
•
ATM Virtual Path ID (VPI); Required if not using default value
•
ATM Virtual Circuit ID (VCI); Required if not using default value
•
Encapsulation type; Required if not using default value
•
Modulation type; Required if not using default value
4.4 PPP
Settings
The following PPP settings should be available during configuration of a PPP
connection.
•
Username (for PPP applications only)
•
Password (for PPP applications only).
