Chapter 2: LED Indicators and back panel
Page
6
USB:
To connect the CopperJet to the USB port of the PC. Note: not
available on all units.
ETH:
To connect the CopperJet to the Ethernet port of the PC, hub or
switch.
2.3 CopperJet 426 LED indicators
Power:
When the CopperJet is connected to a power source, the Power LED
will illuminate.
Phone:
The Phone led will blink when the connected POTS phone receives an
incoming call. During an analogue modem connection, blinking
indicates that echo cancellation is switched off.
The Phone led illuminates when the connected POTS phone is off-
hook.
DSL:
Blinking indicates that the DSL protocols starts handshaking.
Illuminates when the SHDSL network is correctly configured and
connected.
USB:
The USB led will illuminate when you connect the CopperJet to the
USB port on your PC, and the USB drivers are installed. Note: not
available on all units.
Ethernet: The Ethernet led will illuminate when you connect the CopperJet to
the Ethernetport on the PC or hub/switch.
2.4 CopperJet 426 back panel
PWR
USB
LINE
1
2
3
4
Phone
Back panel
Ethernet
1
2
3
4
PWR:
Only the power adapter that comes with the package can be
connected to the power jack.
PHONE:
To connect your POTS Telephone to the CopperJet
LINE:
To connect the CopperJet to the SHDSL line of your provider.
