Chapter 6.2: Advanced Voice over DSL Configuration
Page
22
5.4 WAN
Connections
To create a DSL Connection, you need to add a WAN connection. Depending on
the network of your ISP, you need to configure either a BRIDGED or ROUTED
WAN connection. Bridged connections are often RFC1483 BRIDGED (attached to
the Bridge). Routed connections are often RFC1483 ROUTED, PPPoE, PPPoA or
IPoA (attached to the Router).
To create and configure WAN connections for your CopperJet, go to the
Configuration menu and click on WAN connections. The WAN connections page is
displayed.
This page contains a table that displays the current WAN connections or services
that have been created. To create a new WAN connection, click on Create a new
service. The New WAN Service page is displayed.
This page contains a list of all the WAN connections that are available. Select the
type of service you wish to create and click on Configure.
