Chapter 6.2: Advanced Voice over DSL Configuration
Page
10
5 Configuring the CopperJet
Configuration of the CopperJet SHDSL router can be done through the build-in
HTTP WebServer. Users can access this WebServer using a standard browser like
Netscape Navigator or Microsoft Internet Explorer.
5.1 Accessing the build-in WebServer
To access the build-in WebServer, you need to launch a HTTP Web browser. Enter
the IP address of the CopperJet in the address bar.
The default Ethernet IP address of the CopperJet is: 172.19.3.1
The default USB IP address of the CopperJet is: 172.20.3.1
The address for accessing the CopperJet’s WebServer through an Ethernet
connection would be
HTTP://172.19.3.1/
The first time that the WebServer is launched during a session, the Welcome!
message is displayed at the top of the Status homepage. This message is
replaced by the Status heading once the page is automatically or manually
refreshed.
