ALLIANCE SWNNC2HP115TQ01, Original Instructions Manual

Page: 45 / 90

4. When
Error-
appears in the display, press the START (en-
ter) keypad. There are multiple programmable error code pa-
rameters. Refer to
Table 5 .
5. Press the DELICATES (
∧
) or the COLD (
∨
) keypad to select
the desired option.
6. Press the DELICATES (
∧
) or the COLD (
∨
) keypad to select
error code.
7. Press the START (enter) keypad when the correct code ap-
pears in the display. The current status will appear in the dis-
play.
NOTE: Press the DELICATES (
∧
) or the COLD (
∨
)
keypad and then the START (enter) keypad again to
choose a specific coin error parameter. Refer to
Ta-
ble 5 .
8. Press the DELICATES (
∧
) or the COLD (
∨
) keypad to
change the status.
9. Press the START (enter) keypad when the correct status ap-
pears in the display. The next Error Code Programming op-
tion will appear in the display.
Error Code Programming
Error-
CErr-
Coin Error Parameters Menu
CEr 1
Coin Error - Determines if display will
show error.
CEr 2
Coin Error Penalty - If enabled, coin er-
ror will erase previous coins entered and
reset the vend price.
CEr 3
Vend Header Present Error - If enabled
and coin drop header is unplugged, con-
trol ignores coin inputs.
E FL-
Fill Error Menu
E FL 1
Fill Error (On/Off) - If Enabled, will set
error after fill error alarm time if fill level
isn't reached, if disabled will allow filling
forever if fill level never reached.
E FL 2
Fill Error Time - Time allowed in mi-
nutes to reach target fill level before set-
ting a fill error.
E nF-
No Water Flow Error Menu
E nF 1
No Water Flow Error (On/Off) - If Ena-
bled, will set error after no water flow er-
ror time if level isn't reached.
E nF 2
No Water Flow Error Time - Time al-
lowed in minutes to reach a no flow 0.5
level.
E dr-
Drain Error Menu
E dr 1
Drain Error (On/Off) - If Enabled, will
set error if empty water level isn't
reached by the end of the cycle. If disa-
bled will allow no alarm.
Table 5 continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
45 Part No. 204370ENR1