Display Identification
Light Emitting Diodes (LEDs)
LIGHT EMITTING DIODES (LEDs) are used to indicate the
chosen cycle and cycle status. See below for information on each
LED.
CYCLE LED
CYCLE LED will remain lit the entire cycle.
WASH TEMP LED
WASH TEMP LED will remain on until the end of the cycle or
will change to show the rinse temperature if programmed to do
so.
WASH LED
WASH LED is lit at the beginning of a wash portion of the cycle
and will remain lit until the wash is complete.
RINSE LED
RINSE LED is lit at the beginning of a rinse portion of the cycle
and will remain lit until the rinse is complete.
SPIN LED
SPIN LED is lit during the Final Spin portion of the cycle.
INSERT COINS/CARD LED
INSERT COINS/CARD LED prompts the user for coins or a card
to satisfy the vend price. The six digits show the vend price re-
maining to be satisfied. The vend price displayed will decrease
with each coin inserted. If new options are selected before the
first fill step of the wash cycle completes and it requires addition-
al vend, the INSERT COINS/CARD light will flash one (1) sec-
ond on and one (1) second off, and the display will flash the vend
price remaining to be satisfied one (1) second on/off.
LIGHT LED
LIGHT LED is lit when the Option LIGHT modifier is selected.
MEDIUM LED
MEDIUM LED is lit when the Option MEDIUM modifier is se-
lected.
HEAVY LED
HEAVY LED is lit when the Option HEAVY modifier is selec-
ted.
7-Segment Digits
The 7-SEGMENT DIGITS are used to display the time remain-
ing in a cycle, vend price, error messages and descriptive codes.
During diagnostic testing or manual programming of the control,
these digits will display descriptive codes and values.
Display Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12
Part No. 204370ENR1
Summary of Contents for SWNNC2HP115TQ01
Page 2: ......
