36
53264
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
46. HIGH OR LOW THERMOSTATS
a. Remove front panel. Refer to Paragraph 31,
steps “a” through “c”.
b. Refer to Figure 24 for thermostat removal.
Figure 24
DRY853S
HIGH
THERMOSTAT
LOW
THERMOSTAT
ELECTRIC MODELS
GAS MODELS
Figure 25
DRY854S
LIMIT
THERMOSTAT
ELEMENT
ELEMENT
ATTACHING
SCREWS
DRY855S
LIMIT
THERMOSTAT
GAS VALVE SHOWN
IN CLOSED POSITION
BURNER
HOUSING
