50
513447
Adjustments
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
28. Cleaning Non-Electronic
Coin Drop
a. Disconnect electrical power to machine and
drop.
b. Remove coin drop from machine.
c. If lint is preventing coins from rolling through
coin drop, blow compressed air though coin
entry and along the side of the coin drop. Refer
to
Figure 12
.
d. Insert a coin through the coin drop. If coin does
not roll through drop, continue with the
following.
e. Remove cotter pin from top of drop. Refer to
Figure 12
.
Save pin for reinstallation when
cleaning is complete.
f. Move metal clip closer to sensor so that it
comes off frame. Refer to
Figure 12
.
g. Remove coin return from coin drop frame.
Refer to
Figure 13
.
h. Check coin path in coin drop for lint and
residue. If lint or light residues are present, use
a cotton swab to remove. If heavy residue is
present, it may be necessary to first scrape off
excessive residue and then use a cotton swab
dipped in water or isopropyl alcohol (rubbing
alcohol) to remove remainder of residue. Refer
to
Figure 14
.
Figure 12
DRY3B
Compressed
Air
Cotter
Pin
Metal
Clip
Figure 13
Figure 14
DRY4B
Coin Drop
Frame
Coin
Return
DRY5B
Cotton
Swab
Summary of Contents for BD3LLFGS401UW01
Page 2: ......
