Allett BUFFALO 24", Operator And Parts Manual

Page: 7 / 68

1
Introduction
The Buffalo mower is a petrol engine powered, self propelled machine with a belt and
chain driven differential rear roller. The cutting cylinder is belt driven.
The Buffalo mower is a product of exceptional quality and is designed solely for
cutting grass. Use in any way other than that stated is considered contrary to the
intended use. Compliance with and strict adherence to the conditions of operation,
service and repair as specified in this Operators Manual also constitute essential
elements of the intended use.
The way in which the Buffalo mower is operated and maintained will have a great
effect on its performance and reliability.
A Buffalo mower should be operated, serviced and repaired only by persons who are
familiar with its particular characteristics and who are familiar with the relevant safety
procedures.
The safety precautions outlined in this manual and all other generally recognised
regulations on safety must be observed at all times.
Any arbitrary modifications carried out to a Buffalo mower may relieve Turfmech
Machinery Limited of liability for any resulting damage or injury.
This manual is based on information available at the time of publication.
Turfmech Machinery Limited reserves the right to amend product specifications
without prior notification.
Model type and serial number
The model type can be found in two places:
1. On the top cover of the mower.
2. On the serial number plate located on the right side of the mower chassis.
ENTER YOUR INFORMATION BELOW
Model:
Serial Number: