Allett BUFFALO 24", Operator And Parts Manual

Page: 13 / 68

7
Safety Notice
Operation
Do not operate the engine in a confined space where dangerous carbon
monoxide fumes can collect.
Mow only in daylight or in good artificial light.
Before starting the engine, disengage drive to the cutting cylinder and the rear
drive roller and engage the parking brake.
Watch out for traffic when crossing or near roadways.
Always disengage drive to the cylinder before travelling over any surface other
than grass.
When using the mower, never direct the discharged material towards
bystanders or allow anyone near the machine whilst it is in operation.
Never operate a mower with defective guards.
Do not attempt to increase the factory set maximum speed of the engine.
Operating an engine at excessive speed will lead to increased wear and tear
and increases the risk of injury.
Before leaving the operator position:
-
Disengage drive to the rollers.
-
Disengage drive to the cylinder.
-
Engage the parking brake.
-
Set engine rpm to minimum.
-
Switch the on/off switch on the handlebars to the OFF position.
Engage the parking brake, disengage drive to the cutting cylinder, switch off
the engine and ensure the cylinder is completely stationary:
-
Before releasing blockages.
-
Before checking, cleaning or working on the machine.
-
After striking a foreign object inspect the mower for damage and rectify
any problems before continuing.
-
Before refuelling.
-
Before making cutter head adjustments.
If the machine starts to vibrate abnormally STOP immediately and check the
machine over.
Never park the machine on a slope.