Allett BUFFALO 24", Operator And Parts Manual

Page: 16 / 68

10
Starting the engine
Before starting the engine:
•
Ensure that the drives to the rear roller and cutting cylinder are disengaged.
•
Check that the parking brake is engaged.
•
Check that the engine switch and
handlebar switches are in the ON
position.
•
Turn the fuel to the ON position.
•
Move the choke lever to the CLOSED
position.
•
Do not use the choke if the engine
is warm or air temperature is high.
•
Move the throttle control slightly forward.
•
Pull the starter grip lightly until resistance is felt, then pull briskly.
•
Do not allow the starter grip to snap back against the engine. Return it gently
to prevent damage to the starter.
•
As the engine warms up gradually move the choke back to the OPEN position.
•
To stop the engine during normal operation use the handlebar on/off switch.
REFER TO YOUR ENGINE MANUAL FOR DETAILED INSTRUCTION ON THE
CORRECT AND SAFE OPERATION OF YOUR ENGINE.