Allett BUFFALO 24", Operator And Parts Manual

Page: 31 / 68

25
•
Locate the engine drain plug at the bottom of the engine (see p24). There are
two drain plugs, the drain plug at the rear of the machine is more accessible.
•
Remove the dipstick.
•
Place a container of suitable capacity underneath the drain plug, remove the
plug and allow the old engine oil to empty out.
•
Once the engine has been drained of oil replace the drain plug and refill the
engine with clean oil through the dipstick hole. The level should be set at the
top thread of the dipstick hole.
Miscellaneous Maintenance
Adjusting cable tensions
Fine adjustments can be made as described below:
•
Locate the in-line adjuster on the cable.
•
Loosen the locking nut.
•
Adjust the cable tension as necessary by
rotating the adjuster.
•
When the cable tension is correct tighten the
lock nut.
Coarse adjustments can be made as described below:
•
Locate the main spring adjuster on the
cable.
•
Loosen the two lock nuts.
•
Adjust the cable tension as necessary
by either compressing or relaxing the
spring.
•
When the cable tension is correct tighten the lock nuts.