Allett BUFFALO 24", Operator And Parts Manual, Page: 34 / 68

28
Storage
Carry out the following procedure before storing the Buffalo mower between mowing
seasons.
WARNING - PREVENT ACCIDENTS
Never drain fuel in an enclosed environment – always undertake this
procedure out doors or in a well ventilated workshop environment.
WARNING - PREVENT ACCIDENTS
Always send unwanted fuel to an authorised disposal agent – never dispose of
fuel down the drain or by any other means.
Preparing the machine for storage
•
Clean the machine so that it is clear of grass and any other debris.
•
Repair any worn or damaged parts – replace with genuine Turfmech/Allett
parts if new parts are required.
•
Check all bolts and tighten as necessary.
•
Repair any damaged paint work.
•
Apply a wax coat to all panels (standard automotive wax can be used).
•
Allow all belts to dry before storing.
•
Lubricate all grease points and apply a thin coat of chain lubricant to the
chains.
•
Apply an anti-rust lubricant to the cutting cylinder and blade.
•
Allow the engine and exhaust to cool before storing in any enclosure.
•
Always chock the roller when the mower is being left in storage.