Allett BUFFALO 24", Operator And Parts Manual

Page: 15 / 68

9
Operation
Operator controls
1. Parking brake
2. Cutting cylinder drive clutch
3. Handlebar
4. Rear roller drive clutch
5. On/off switch.
6. Throttle control
Adjusting the handle bars
•
Loosen the four bolts at the base of the upper
handle bar.
•
Move the handle bar into the desired position
.
•
Tighten the four bolts.
•
To achieve the lowest hand arm vibration
levels, set the lower handle springs.
•
Adjust the spring tension (using the cam
adjuster at the bottom of the handlebars) so
the handles ‘float’ just off the rubber stops.
Parking brake
•
To engage the parking brake, pull the red lever
rearwards.
•
Tighten the lock handle by rotating it clockwise
in order to hold the brake lever in place.
2
3
4
5
6
1