Allen-Bradley VersaView 1200M, User Manual

Page: 38 / 62

Publication 6186M-UM001D-EN-P
3-8 Configuring the Video Setup
General OSD Menu Navigation
Refer to the following for OSD menu navigation guidelines:
•
Press the Menu/Return button to open the OSD main menu.
•
Press the arrow buttons to move between the function icons.
•
As you move from one function to the other, the function menu
changes to represent the correct icon.
•
To activate the highlighted function, press the Menu/Return
button.
•
Use the arrow buttons to make your changes.
•
Press the Exit button once to return to the OSD main menu
where you can select another function.
•
To exit the main menu, press the Exit button again.
•
If an icon has more than one sub-function, use the arrow
buttons to select the sub-function.
•
To activate a highlighted sub-function, press the Menu/Return
button.
For all OSD menus and descriptions, see the following table and the
tables beginning on the next page.
OSD Menus (VersaView 1200M)
Level Menu Description Values
Main Menu RGB Menu Adjusts screen color and sharpness
Geometry Menu Adjusts image position and geometry
Contrast Menu Adjusts contrast and color balance
Language Menu Selects OSD language
Auto Training N/A (this function is not enabled at
this time) N/A
DOS/GFX Chooses a VGA input signal that is in
either text or graphic mode On/Off
NVRAM Init N/A (this function is not enabled at
this time) N/A
Power Down Shuts off the monitor Press menu button to select
Revert Reloads previously saved parameters Press menu button to select
Save Saves current OSD parameters Press menu button to select
RGB Menu Brightness Adjusts the brightness of the screen Press menu button to select
Red Adjusts amount of red on screen –127…127
Green Adjusts amount of green on screen –127…127
Blue Adjusts amount of blue on screen –127…127
Color Temp Adjusts color temperature of screen 0…7
Sharpness Adjusts screen sharpness 0, 1
Main Menu Returns to main menu Press menu button to select