Allen-Bradley VersaView 1200M, User Manual

Page: 27 / 62

Publication 6186M-UM001D-EN-P
Installation 2-17
The serial touchscreen interface connection to the host is made
through an RS-232 DB-9 (female) D-shell connector located on the
side panel.
To connect the touchscreen:
1. For units with the touchscreen option, connect one end of the
included touchscreen serial cable to the RS-232 port connector
on the monitor.
2. Connect the other end to a serial port (usually COM2) on the
host computer.
3. Tighten the captive screws on the cable connector to secure it.
Connecting AC Power
Through the use of the included AC power adapter, a 6186-M can
use a single-phase AC power supply providing 90…264V AC at
50…60 Hz.
Power must be available at a grounded, three-pin outlet located
nearby. Whenever possible, connect the monitor to the same AC
source that supplies the computer.
To connect power to the monitor:
1. Turn off the main switch or breaker.
2. Connect the external power supply cable to the 12V DC power
input connector on the monitor. Secure the connection by
screwing the barrel over the threads.
3. Connect the AC power cord into the main supply.
4. Restore AC power.
WARNING
Hazardous Location Installation
The AC power cord must be secured in the adapter
by the metal cage.
Allen-Bradley Spares