Allen-Bradley VersaView 1200M, User Manual

Page: 28 / 62

Publication 6186M-UM001D-EN-P
2-18 Installation
Connecting DC Power (Terminal Block, VersaView 1500M, 1700M,
2000M Only)
To connect power to the monitor:
1. Turn off the main switch or breaker.
2. Route the power wires from your 24V DC or 12V DC power
supply, and connect the leads to the DC input terminal block on
the monitor as shown in the following figure. Tighten the screw
terminals to ensure a good connection.
3. Secure the connector to the unit using the two side screws.
4. Restore DC power.
+24V Gnd +12V +24V Gnd +12V
To
Source
To
Source
20
…
28V DC Source 11.2
…
12.8V DC Source
DC Power
Connection