Appendix
B
Adapter Parameters
Appendix B provides information about the DeviceNet adapter
parameters.
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Topic
Page
About Parameter Numbers
Configuration Tool
Numbering Scheme
•
DriveExplorer
•
DriveTools 2000
•
HIM
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [DPI Port] is parameter 1 as
indicated by this manual.
•
Explicit Messaging
•
RSNetWorx for
DeviceNet
The adapter parameters are appended to the list of drive
parameters. For example, with a drive with 300
parameters, Parameter 01- [DPI Port] is parameter 301.
Parameter List
Parameter
No. Name and Description
Details
01
[DPI Port]
Port to which the adapter is connected. This will
usually be port 5.
Default:
0
Minimum:
0
Maximum:
7
Type:
Read Only
02
[DPI Data Rate]
Data rate used by the drive. This data rate is set in
the drive, and the adapter detects it.
Default:
0 = 125 kbps
Values:
0 = 125 kbps
1 = 500 kbps
Type:
Read Only
03
[DN Addr Cfg]
Node address if the Data Rate switch is set to
“PGM” (Program).
Default:
63
Minimum:
0
Maximum:
63
Type:
Read/Write
Reset Required:
Yes
Summary of Contents for PowerFlex 20-COMM-D
