Configuring the Adapter
3-13
6.
If you are receiving a Reference, set the scale in
Parameter 33 -
[Peer Ref Adjust]
. It can be scaled between 0.00 and 199.99%.
Figure 3.19 Peer Reference Adjust Screen on an LCD HIM
7.
Set
Parameter 36 - [Peer Inp Timeout]
to the maximum amount of
time the adapter will wait for a message before timing out.
Important:
This value must be greater than the product of
Parameter 42 - [Peer Out Time]
multiplied by
Parameter 43 - [Peer Out Skip]
in the adapter from
which you are receiving I/O.
Figure 3.20 Minimum Peer Receiving Time Screen on an LCD HIM
!
ATTENTION:
To guard against equipment damage and/or
personal injury, note that changes to
Parameter 33 - [Peer
Ref Adjust]
take effect immediately. A drive receiving its
Reference from peer I/O will receive the newly scaled
Reference, resulting in a change of speed.
Port 5 Device
20-COMM-D
Parameter #: 33
Peer Ref Adjust
0.00
%
0.00 <> 199.99
Default = 0.00%
Port 5 Device
20-COMM-D
Parameter #: 36
Min Peer Rx Time
10.00
Secs.
0.01 <> 180.00
Default = 10.00 Secs
Summary of Contents for PowerFlex 20-COMM-D
