Allen-Bradley POINT I/O 1734-VHSC24, User Manual, Page: 42 / 64

Publication 1734-UM003A-EN-P - August 2000
4-2 Configuring Your Very High Speed Counter Module
2. Add the communication device as shown below. (In this case,
the chosen device was a 1770-KFD RS232 Interface.)
Adding I/O Modules to Your Network
After you add the communication device, you must add the POINT
I/O modules connected to the scanner on the PointBus.
1. Add modules as shown below. .
The out-of-the-box node setting for 1734 modules is 63. You can
change the setting by using the node commissioning tool. The node
commissioning tool is available either online or offline.
1. Click here to expand the list
of communication adapters.
2. Double-click here to choose
the scanner. You can also
click and drag the scanner
name onto the network.
Make sure you choose the
1734-ADN Point I/O Scanner.
The scanner appears
on the network.
IMPORTANT
The scanner must always exist on the DeviceNet
network at Node 00.
1. Click here to expand the list
of Specialty modules.
2. Double-click on the catalog
number to choose the
module. You can also click
and drag the module name
onto the network.