Introduction to PanelView 1200 Operator
Terminals
Chapter 1
1-19
SLC5/02 via 1747SN
One or more PanelView 1200 terminals can be connected to the 1747-SN
I/O Subscanner Module (SLC–5/02 RIO connection) for the SLC–5/02
processor. Each module provides an additional remote I/O link for the host
programmable controller. The rack range of the 1747-SN is 0 to 3.
Important
No block transfers are possible with the SLC-5/02 and 1747-SN
Series A module.
1771SN I/O Subscanner Module
One or more 1771-SN I/O Subscanner Modules can be installed in any
standard Allen-Bradley 1771 I/O rack. Each module provides an additional
remote I/O link for the host programmable controller. One or more
PanelView 1200 terminals can be connected to any of the previously
mentioned processors along with other I/O racks via a 1771-SN I/O
Subscanner Module. Refer to the 1771-SN Sub I/O Scanner Module Data
Sheet for specific details.
6008SI IBM PC I/O Scanner
This module can be installed in an IBM PC
r
or compatible computer to
provide the computer with an Allen-Bradley 1771 Remote I/O Link. You
can then connect Allen-Bradley Remote I/O racks and devices such as the
PanelView 1200 terminal to this computer.
6008SV VME I/O Scanner
This module can be installed in a VME backplane, providing the VME
controller with an Allen-Bradley 1771 Remote I/O Link. Allen-Bradley
Remote I/O racks and devices such as the PanelView 1200 terminal can
then be connected to this VME controller.
6008SQ DEC QBUS I/O Scanner
This module can be installed into a DEC Q-Bus controller to provide it
with an Allen-Bradley 1771 Remote I/O Link. Allen-Bradley Remote I/O
racks and devices such as the PanelView 1200 terminal can then be
connected to this controller.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
