HERA LS Series CD/DVD Duplication System / User Manual
14
8. Counter
Use the Counter menu to enable or disable the
Counter
feature. The counter tells you how many
discs have been copied and how many discs are left to go during the progress and it will stop the
job once the desired number of copies has been made.
9. AUTOCOPY Enabled
This menu option turns on the hidden
AUTOCOPY
main menu option. The
AUTOCOPY
function
simplifies the copy process by allowing you to stack blank media on a spindle(s), place the
master on top of the stack on the first spindle, and press the
Enter
button on
AUTOCOPY
key
in the main menu. It will load the content of the top disc of the 1
st
input spindle (master disc) into
the Reserved Partition of the Hard Drive and copy it to blank disc(s) below it and other input
spindle(s) if exists.
10. DVD+R Compatibility Mode
This feature allows you to turn the
DVD+R High Compatibility Mode
feature ON or OFF. The
purpose of this feature is to increase the compatibility of DVD+R media with a broader range of
DVD Video players.
11. ISRC
This option will allow you to enable/disable copying the ISRC code of an Audio CD. ISRC is the
serial number of the audio track that uniquely identifies the song in that audio track. This ISRC
code is commonly found in commercial Audio CDs and rarely seen on home made Audio CDs.
By enabling this feature, the duplication performance will be lowered.
12. Disable Drives
Use this utility to allow the system to disable certain drives/trays when certain drives/trays are
producing high failure rates. See “Disable Drives” on page 42.
13. CD Overburn
Most CD-R media is either 650MB or 700MB. The burning starts from the center of the CD and
works its way out but stops before the physical edge of the CD. Overburning is a burning method
to bypass the limitations of burning further out onto the edge of the CD. This can result in slightly
higher storage capacity, however, it has also been known to have compatibility playback issues.
Please use it with caution.
14. Max Failure per Job
Use this setting to set the maximum number of failures the autoloader is allowed per job. Once
the maximum is reached, the job will be stopped.
15. Max Failure per Drive
Use this setting to set the maximum number of failures each drive is allowed during the job.
Once the maximum is reached for any particular drive, said drive will be disabled for the
remainder of the job. The autoloader will continue to function using the remaining drives.
14. System Utilities (page 44)
1. Disc Info
Use the Disc Info utility to identify the type of blank recordable media. This utility identifies your
blank recordable Media's format, capacity, manufacture ID, and the Media's certified writing
speed.
2. System Info
