HYDROGEN GENERATOR
H
2
Page 3
1
•
This product is designed for household use only. Use in a commercial application will void your valuable warranty.
• NEVER attempt to repair or service your ionpia H
2
yourself. Attempting to do so will void your valuable warranty.
Contact AlkaViva Technical Support to arrange service or repair.
• If your ionpia H
2
becomes submerged in water, unplug the power cord from the wall before removing. Failure to do so
could result in shock!
• Filters should be replaced per manufacturer suggestion at the end of the filter life. It is important that the
replacement filters are installed in the correct position with every filter change.
• The ionpia H
2
must be grounded! In the event of malfunction or breakdown the grounding conductor will prevent risk of
electric shock/spark. The electrical plug must be plugged into an appropriate outlet that is installed and grounded in
compliance with all local codes and ordinances.
• When installing your ionpia H
2
use only manufacturer provided parts and equipment. Using third-party or after-market
parts can void your valuable warranty.
• Always install on a solid and level surface. Do not move your ionpia H
2
while in use.
• DO NOT install or use your ionpia H
2
near open heat sources or open flames such as stoves, ranges, heater vents or
candles.
• The ionpia H
2
can be used on 110v~240v. Always be sure to use the appropriate factory electrical plug. Always make
sure that the plug is firmly inserted into the outlet. Never try to make any modifications to manufacturers original
equipment, and never use a damaged power cord.
• Be sure that the power adapter is placed where it will not come into contact with water.
• Protect your ionpia H
2
from freezing temperatures and direct sunlight.
• Only operate your ionpia H
2
with cold water. Hot water will damage your filters.
• If The ionpia H
2
makes strange or unusual noises or odors, unplug the power cord immediately and contact AlkaViva Technical
Support.
• Unplug The ionpia H
2
if you plan on not using it for an extended period (2 weeks). Store your filters in a plastic bag in
the refrigerator to prevent bacterial growth. In cases of extended periods of non-use (4+ weeks), filter replacements may
be necessary.
• Do not use your ionpia H
2
with well water, water with extreme hardness, high sediment or TDS without first contacting
AlkaViva Technical Support.
• Your ionpia H
2
is not under warranty for any damages caused by hard water or environmental conditions.
• Only clean the exterior with warm water, detergent and a soft rag or paper towel. Do not use chemical or abrasive
cleaners – they can damage the surface. Do not spray or pour water over your ionpia H
2
. Never submerge your
ionpia H
2
.
• Do not close, bend, pinch, press or otherwise obstruct inlet supply lines, or equipment.
Safety, Installation and Operating Precautions
Precautions and Safeguards
