Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 39 / 199

Removing the battery case
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the right side-panel. See “ Removing the side panels ”.
3 Remove the battery .
Procedure
1 Lay the chassis on the left side.
2 Press the release tabs on the cable connector to disconnect the battery-
case cable from the I/O board.
3 Remove the two screws (#6-32x5.2) that secure the battery case to the
chassis.
39