Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 81 / 199

Removing the full-length
graphics cards
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
Procedure
1 Lay the chassis on the right side.
2 Locate the graphics card (PCI-Express card connector) on the system
board. For more information on the graphics connector, see “
system-board
components ”.
3 Press and hold the securing tab on the clamp.
81