Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 95 / 199

Removing the logo board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
3 Remove the top fan .
Procedure
NOTE: Note the routing of all cables as you remove them so that you
can route them correctly after you replace the logo board.
1 Lay the chassis on the right side.
2 Disconnect all the cables from the logo board.
3 Remove the screw (#6-32x6) that secures the logo board to the chassis.
95