Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 179 / 199

Replacing the antenna cables
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Place the antenna cables in place and slide the antenna cables through the
slot on the chassis.
2 Replace the six screws (#6-32x6) that secure the antenna cables to the
chassis.
3 Adhere the tape that secures the antenna cables to the chassis.
4 Route the antenna cable through the slot on the chassis and then through
the routing guides on the chassis.
5 Route the gray antenna cable through the routing guide on the chassis.
6 Connect the antenna cables from the wireless card.
Post-requisites
1 Replace the rear bezel .
2 Replace the system board .
3 Replace the processor liquid-cooling assembly .
4 Replace the wireless card .
5 Replace the full-length graphics cards .
6 Replace the memory modules .
7 Replace the handle bars .
8 Replace the left and right side-panels. See “ Replacing the side panels ”.
9 Replace the stability foot .
179