Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 69 / 199

Replacing the memory modules
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Align the notch on the bottom of the memory module with the tab on the
memory-module slot.
2 Insert the memory module into the memory-module connector until the
memory module snaps into position and the securing clip locks in place.
NOTE: If you do not hear the click, remove the memory module
and reinstall it.
1 memory module 2 memory-module slot
3 notch
69