Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 146 / 199

Replacing the front bezel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Align the tabs from inside the chassis on the right and left side and place the
front bezel and snap it in place.
2 Connect the top tron light-cables to the front bezel.
3 Connect the bottom tron light-cables to the front bezel.
4 Replace the screw (6-32x5.2) from inside, securing the front bezel to the
right side of the chassis.
5 Replace the two screws (6-32x5.2) from inside, securing the front bezel to
the left side of the chassis.
6 Replace the four screws (#6-32x6) that secure the front bezel to the bottom
and top of the chassis.
Post-requisites
1 Replace the handle bars .
2 Replace the left and right side-panels. See “ Replacing the side panels ”.
3 Replace the stability foot .
146