Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 174 / 199

Removing the antenna cables
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
3 Remove the handle bars .
4 Remove the memory modules .
5 Remove the full-length graphics cards .
6 Remove the wireless card .
7 Remove the processor liquid-cooling assembly .
8 Remove the system board .
9 Remove the rear bezel .
Procedure
1 Disconnect the antenna cables from the wireless card.
174