Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 29 / 199

Removing the stability foot
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Tilt the computer towards the front until the base is facing up.
Figure 5. Tilt the computer
2 Remove the two screws (#6-32x6) that secure the stability foot to the
computer.
29